Jelly Bean 4.3

It seems like I just finished upgrading everything to Jelly Bean. Now here comes Android 4.3. Another flavor of Jelly Bean.

As usual CyanogenMod is awesome. They started releasing CM 10.2 nightlies for a small set of devices and my Samsung Captivate was among them.

All I thought I had to do was to go to "Settings" / "About phone" and look in the "CyanogenMod updates".

From there I changed the "Update types" setting to "New versions (incl. Nightlies)" and I was shown the nightlies.

I chose cm-10.2-20130817-NIGHTLY-captivatemtd and let it download and install.

I was doing good until that point.

What I didn't realize was that they had to repartition the NAND storage. When the CM Updater tried to flash the ROM I got the following screen.

Whoops!

At that point I backed out and went to RTFM.

As usual there's a thorough thread on xda-developers.com. Obviously I should have started there.

I had missed 2 things that I should have done in preparation for this update. First, I needed to have a nandroid backup of /data before I started. Second, I needed new gapps (Google apps).

Fortunately I had just taken a nandroid backup and written it to my external SD card so I was ready with that.

The second post in the above thread had a link to the new gapps. I downloaded those and Bluetoothed them over to the Captivate.

So back to the CM Updater. This time I was expecting the prompt for repartitioning. What I didn't expect was to have to go searching for the "update.zip" referred to above.

It's not called update.zip. It's /storage/sdcard0/cmupdater/cm-10.2-20130817-NIGHTLY-captivatemtd.zip. At least now I know. So do you.

So the repartition and flash worked. Before I left recovery I restored /data using these instructions and rebooted.

Then I went back into recovery and installed the gapps.

Here's the result.

I thought I was finished.

I kept having various problems with a couple of apps. The first post in the above thread said to "WIPE (wipe data/factory reset + wipe cache partition)". CM Updater didn't do that.

I uninstalled and reinstalled YouTube, Voice, Drive and Chrome and everything has been quiet.

There's a new camera app called focal but as of the 20130817 nightly it is not complete.

I'm looking forward to TRIM running.

Subsequently I've upgraded to the 20130824 nightly and now focal works (so far).

To Be Fair, Again

To be fair, Google's services went down recently as did Microsoft's services, again.

To be fair, this is what Microsoft's Dashboard looked like:

To be fair, this is what I got when I went to Google's Dashboard:

To be fair, Microsoft's lasted 40+ hours compared to Google's 2 minutes.

To be fair, both probably had lingering effects.

To be fair, this is what life in the cloud is going to be like for the foreseeable future. But there is a pattern here.

On the Way to VoIP - Part 1

In some ways I'm still old fashioned. I still have POTS. And I have DSL. I've had my challenges with DSL but I'm living with it. I just go to my daughter's house to upload my videos and I've come up with an alternative to cloud backup. But I'm just making excuses.

And the cost.

$52.11 for voice service. And $42.95 for Internet.

Yeah, there are places where I can make minor savings. I can get the POTS down some and drop long distance. Then we could use our cells for long distance. But that requires re-training. I went and sat down with AT&T and they couldn't come up with any savings. I did learn something that I'll raise later.

In my news feeds I'd come across several articles on VoIP.

• How to Port a Landline to Google Voice for $0.00
• The Ultimate Google Voice How-to Guide
    Google Voice: a step-by-step primer on ditching your land line while keeping your number
• How to Switch to VoIP and Ditch Your Home Phone Bill Forever

These inspired me. I've been using Goole Voice for my business line and was very satisfied with it.

The Obihai devices keep coming up in these discussions. There are several models including OBi100 and OBi110.

Where I'm headed is to:

1. Move my Internet connection to Comcast (from AT&T DSL)
2. Cancel my AT&T DSL
3. Port my POTS number to Google Voice (not quite that simple)
4. Use OBi100 to deliver the Google Voice number to home phones

Years ago when Google was more liberal with their Gmail account names I got a Gmail account that is [myhomenumber]@gmail.com. That was fortunate. Don't use your normal Gmail/Google Apps account for the Google Voice number. I added a Google Voice number to that Gmail account. I just let it assign a random (temporary) number for now. I'll fix that later.

Then I bought an OBi100.

That's a quarter sitting on top of the device.

Following the instructions here I setup the Google Voice account on the OBi100 in less than 5 minutes.

I plugged a spare phone into it and played with it. It worked fine.

My normal house phones are cordless Uniden CLX485s that only use one RJ11 connection. To give the OBi100 a real life test, I plugged the Uniden CLX485 base into the OBi100 and plugged the spare phone into the house RJ11. Remember that I can't unplug the house from the POTS due to the DSL services.

Then I forwarded my POTS number to the temporary Google Voice number.

Works like a charm.

There are even some unexpected benefits. When a call comes in to my POTS number, the spare phone will ding one time as it forwards to the temporary Google Voice number. Sometimes we would hear that ding and the temporary Google Voice number wouldn't ring.

I logged into the associated Google Voice account and there was nothing in the inbox. But there were entries in the spam folder. Google Voice was sending those calls directly to spam. Since I made this switch I have received NO telemarketer calls.

My plan is to continue with this configuration for a month to make sure I understand it completely.

The next steps are to install Comcast Internet and cancel AT&T DSL. Then port the POTS number to Google Voice.

TRIM

Every now and then my propeller beanie comes out.

This is one of those times.

This time the recent announcement of Android 4.3 triggered it. AnandTech discovered that buried deep in the code was TRIM. And that the lack of TRIM was the cause of various Android devices getting slower as they get older.

Stop and think about that. How many Android devices have you had that you felt like got slower as they got older? And you thought you were just crazy?

NO!

They really were getting slower as they got older.

Here's the story in a nutshell.

Remember that Android smartphones use the same technology as SSD devices for internal memory. SSD devices read fast. They write to an empty block fast. Writing to a used block is slow. Really slow.

So when all the unused blocks in an SSD device get written to subsequent writes get really slow and the device slows down.

Why don't SSD drives in PCs and laptops exhibit this phenomenon?

One word: TRIM

Do you have an SSD in your PC? Try this.

Run Command Prompt (cmd) as an administrator and type: "fsutil behavior query DisableDeleteNotify".

I'll bet you got a "0." I did. That means your device and operating system support TRIM.

So what does TRIM do? Watch out for the spinning propeller.

SSDs are smart enough to know that they are slow writing to a used block. So the SSD will write to all the unused blocks first. Eventually it will have written to all the blocks. From that point forward, all writes will be slow.

But wait you say. My SSD isn't full. I've deleted lots of files. But when an operating system deletes a file, it doesn't really erase the data. It just nullifies the pointer to the file. So the blocks on the disk (SSD in this case) retain the data. Remember DOS Undelete programs?

So deleting files doesn't fix the write problem.

What to do?

TRIM enabled disks and operating systems have a protocol where periodically the operating system passes a list of blocks that were contained in deleted files to the SSD. Then in the background the SSD goes and clears those blocks.

Problem solved.

Crucial has a deeper discussion here.

Remember the ThinkPad X40 that I put an SSD in? It was so fast. At first.

Then it slowed to a crawl. My thread on the ThinkPad forums is here.

Now think about your Android tablet having that problem.

The solution? Get to Android 4.3 as fast as you can.

Windows 8 is Dead for the Enterprise

A recent Forrester report was entitled “IT Will Skip Windows 8 As The Enterprise Standard.” It said that most IT shops are still too focused on deploying Windows 7 to tackle Windows 8.

There are a couple of clarifications to be made here. First this statement is most likely true for the enterprise-class shops but the Small and Medium Business (SMB) shops don’t have much choice. The enterprise-class shops have Microsoft Enterprise Agreements (EAs) or Software Assurance (SA) that give them downgrade rights from Windows 8 to Windows 7. And their PC hardware vendors offer this downgrade service before the new PCs are delivered to the enterprise so the enterprise likely has not seen Windows 8. SMBs on the other hand have to buy through the Value Added Reseller (VAR) or even the retail market. The entry Windows 8 edition does not have downgrade rights.

Secondly, enterprise-class shops should be well on the way to replacing Windows XP systems with the looming end of support of April 8, 2014. With a 5 year replacement cycle they would have just 20% of PCs left on Windows XP. Even that is probably an acceptable risk and there’s still a year to go.

But back to the topic. What will be Windows 8’s role in the enterprise down the road?

Clearly Microsoft has hit some resistance in the forced march of Windows 8 to use the Modern UI (formerly known as Metro).

During a recent earnings call Microsoft's outgoing CFO Peter Klein said that Windows 8.1 (“Blue”) will address customer feedback that Microsoft has been collecting about Windows 8 and Windows RT. Subsequently Microsoft has stated that they will restore the Start button and provide a boot to desktop option.

This seems to address the biggest training issue that Windows 8 is facing in the enterprise but unfortunately it’s a day late and a dollar short. Enterprises are hunkered down doing their Windows XP to 7 migration and don’t want or need to look up.

Windows 7 end of Extended Support is January 14, 2020 so looking at a 5 year refresh cycle, enterprises don’t have to commit to a replacement until early 2015.

The Register reports "most businesses are upgrading to Windows 7, finally coming off of Windows XP, and not even remotely considering Windows 8. Overall, Windows 8 has sold so badly that analysts reckon it was responsible for the industry's worst PC sales since records began."

Microsoft seems to be on a much more rapid upgrade strategy with Windows 8 so this will give enterprises several opportunities to see where Windows 8 will be delivering business value before committing to an upgrade choice.

Microsoft has an advantage over Apple in that Microsoft’s strategy seems to be to converge the kernel and UI for Windows across PCs, tablets, and phones. Apple still has no extant strategy to converge Mac OS and iOS. Clearly Microsoft’s strategy will lower their development and maintenance costs but it is not yet obvious that that will give them a competitive advantage given the diminutive market share of Windows Phone 8 and Windows RT.

When Clouds Go Bump Revisited

Remember last year when I discussed the various service failures of several cloud services?

A recent Dilbert cartoon hit the nail on the head.

When Everyone Is Out To Get You

When everyone is out to get you, paranoia is just good thinking. - Dr. Johnny Fever

It seems like lately everybody is trying to stick their noses into your business. Here's a couple of the stories and how to slam the door on their noses!

The first was the NSA leak by Edward Snowden about a process known as PRISM. Here's the article from the Washington Post.

Next was that USPS is photographing the front of ALL snail mail. Here's the article from the New York Times.

Then AT&T announced that they were issuing a new privacy policy to "provide our customers with ... personalized service." That means they're going to start selling your your location data to marketers. Here's the article from the Business Insider. Here's how to turn it off.

1. Start by clicking the following link, which leads to AT&T’s opt-out page: http://www.att.com/cmpchoice.
2. Log in with your phone number and password.
3. You will now find yourself on AT&T’s privacy settings page, which includes the following blurb: “Our External Marketing and Analytics Reports contain anonymous information about groups of our customers. You may choose to exclude the anonymous information from your accounts from these reports. Please log in to each one of your accounts to opt-out.”
4. Check the box next to each wireless phone line you wish to opt-out with.
5. Click the “Submit” button.

Finally Twitter announced they were going to "make ... Twitter more useful to our users." Here's the article from Lifehacker. To turn off Twitter's new tracking:

1. Log in to Twitter and visit your account settings page.
2. Uncheck the box that says "Tailor Twitter based on my recent website visits."
3. Uncheck the box that says "Tailor ads based on information shared by ad partners."
4. Scroll down and click "Save Changes."

In 1999 Sun's Scott McNealy said "You have zero privacy anyway ...Get over it."

Google Graveyard

Nothing But Jelly Bean

Last summer I installed Android 4.0 (Ice Cream Sandwich - ICS) on my Nook Color. I used a technique described on the XDS Developers forum that let the Nook boot from a microSD card. The developer (verygreen) of this technique has apparently moved on to new challenges.

In the meanwhile, Android 4.2.2 (Jelly Bean) has dropped and there are CyanogenMod ROMs for the Nook Color using the microSD card technique.

The thread above has continued to get comments and questions and leapinlar has been very helpful in fielding these.

So here's how to install CyanogenMod 10 (CM10) Jelly Bean on a microSD for a Nook Color.

Use a Sandisk Class 4 8GB microSD card as recommended here. Use a microSD USB adapter and insert the microSD and USB adapter into your computer.

leapinlar has updated verygreen's microSD image to support ICS and Jelly Bean. Download the latest generic-sdcard-v1.3-CM7-9-10-larger-Rev[?].zip from here. Unzip and extract generic-sdcard-v1.3-CM7-9-10-larger-Rev[?].img.

If you're running Windows, download win32diskimager-RELEASE-0.3-r27-binary.zip from here. Unzip and extract the folder win32diskimager-RELEASE-0.3-r27-binary. Run Win32DiskImager.exe and write leapinlar's image (generic-sdcard-v1.3-ICS-large-Rev[?].img) to the microSD card.

After Win32DiskImager is done with writing, eject the microSD and USB adapter and re-insert it into your computer.

Download a CM10 Release Candidate build from here. Pick the newest from the top of the page. If you're brave download a CM10 nightly build from here.

Download the Google apps for Jelly Bean (currently gapps/gapps-jb-20130301-signed.zip) from here.

With the newly imaged microSD and USB adapter back in your computer, copy the CM10 ROM zip and Google apps zip into the root partition (the only one you can see) of the microSD card. Don't unzip these files.

Eject the microSD and USB adapter from your computer.

Make sure that the Nook Color is powered down and insert the new microSD card into the Nook. Power it up.

If the Nook doesn't boot at this point, revisit the microSD and USB adapter and the downloaded .img file. Explore alternatives perhaps using a different microSD and/or USB adapter and redownloading the .img file.

Sit back and watch. It will take a few minutes and lots of messages will scroll by. Then the screen will go black. Power up the Nook.

Jelly Bean!

I still had to use the Google Play Store to install Gmail and youtube.

It's probably still worth reading my Ice Cream Sandwich errata.

The staying power of the Nook Color is incredible. It will soon be 3 years old and is running the absolute latest Android operating system.

Google Plus Photos NOT

Google is clearly pushing everybody to Google+ for everything and making things "pretty" in the move. The photo feature in Google+ was pretty awful at first. A recent change got the presentation much "prettier" but still there's a tremendous amount of function and information that is simply missing.

Start rant...

When you browse to http://picasaweb.google.com be certain that you don't end up here.

Notice that little yellow banner. "Click here to go back to Picasa Web Albums." I thought that that's where I told it to go.

Anyway...

Here's my Picasaweb landing page.

Three rows of data. Each album has its name, the date of the album and the number of photos in it. The right column is pretty well wasted. I have to click 'Show All Albums" to see the rest.

Here's my Google+ Photos landing page.

Sorry. No albums here. "Highlights" Not your highlights. Google's. Go figure. The first photo in my "Highlights" capture above is more than 6 years old. These "Highlights" change with your activity. After working on this blog post the first highlighted photo is from my blog. Almost 5 years old.

Click on "Albums."

There! But wait. Where are the album dates? And the loss of that information doesn't even give me another row of albums. There are more albums in each row without the wasted right column.

So let's go look at an album. Here's a Picasaweb album.

15 pictures on the page. 123 pixels of header. Lots of white space. You can see that I geotag my photos. Picasaweb collects this and gives me a nice map of the entire album.

Click on "View map" and ...

By the way, that URL is shareable. Nice.

Here's the Google+ album page.

12 full pictures and most of 4 more. 234 pixels of header; 100 pixels more than Picasaweb. No album map. I can't find one at all. And you can see that I requested to "Show location data" but there's none on this page. But it is pretty. The presentation of the panorama (automatically created by Google+) is much nicer than Picasaweb.

Why didn't they make the page of all the albums look like this and overlay the text on the album cover photos?

Now here's a photo in Picasaweb.

Wow! There's a map over there. The ">>" near the right column just collapses the right column and doesn't enlarge the photo.

Same photo in Google+.

Hmm. Wonder where that was taken? The photo is much bigger than in Picasaweb though. They put the caption over on the right to gain that space. But they sure left a lot of dead space below the caption. Maybe they needed the room for the +1 button.

Maybe if I click on "Photo details."

Finally. There's the geotag data. The map has a much more appropriate level of zoom than Picasaweb. And there is the exif data. But wait. That doesn't seem like all the exif data.

Back to Picasaweb and click on "full details page."

That's more like it.

I could go on but you get the picture.

I'm looking forward to Google fixing these and the rest before they "Spring Clean" Picasaweb.

I don't have the patience to even start on the topic of sharing these albums. Maybe next time.

Google Docs Gadget

I'm a big user of Google Docs Drive. And a Google Apps customer. I've been using the Google Labs Google Docs Gadget in my e-mail instance for years.

The Google Docs Gadget is recognized across the web as a valuable Lab tool. For example, this article includes it in its list of "Recommended Gmail & Calendar Labs."

As described in this document the Labs gadget:

Adds a box in the left column which displays your Google Docs. Shows recent docs, starred docs, and has fast search.

Really nice functions. Saves you from having to open a new Drive window just to open, create, or search for a document.

Every now and then something went "bump" in the background and it wouldn't work for a while. Then without a word it'd start back working.

It was useful enough to put up with this level of support.

Until...

This spring the search function began getting errors. I looked at it and the problem was just that the syntax for the URL for Google Drive's search had changed. Looked like a trivial change so I thought I'd just wait and it'd be fixed when they got around to it.

Then last week the gadget disappeared from my e-mail. And from the Google Labs page. It looks like some of Google's "Spring Cleaning" had killed the Lab gadget.

A quick search of the Google Forums showed that I was not alone. One of the posts even had a quick work-around including how to implement it.

I copied his XML and made minor changes. Then I uploaded it to my web site and added it as a gadget via URL.

Here's what my version looks like:

Here's the xml:

<?xml version="1.0" encoding="UTF-8"?><br /> <!-- http://brainglow.com/test/docsgadget.xml --><br /> <Module><br /> <br /> <ModulePrefs title="Google Drive" title_url="http://drive.google.com/" thumbnail="https://www.google.com/ig/modules/docs-thm.png" screenshot="https://www.google.com/ig/modules/docs.png" description="Replacement for the broken Google Docs/Drive Gadget for GMail" height="180" width="600" author="Ben Moore" ><br /> <Require feature="dynamic-height"/><br /> <Require feature="setprefs" /><br /> </ModulePrefs><br /> <UserPref name="iframeURL" display_name="URL to content" required="true" default_value="https://docs.google.com/API/IGoogle?container=gm&view=default&lang=en&country=US&sanitize=0&authuser=0&libs=dynamic-height%3Asetprefs%3Acore%3Agoogle.waitforload%3Aauth-refresh&parent=https%3A%2F%2Fmail.google.com%2Fhtml&up_numDocuments=8&up_viewPreference=opened_by_me&mid=1" /><br /> <br /> <Content type="html" view="default,canvas"><![CDATA[ <div id='dest'><img src="https://www.google.com/ig/images/spinner.gif"/></div><script type="text/javascript"> gadgets.util.registerOnLoadHandler(doRender); function doRender(){ // setup variables var prefs = new gadgets.Prefs(); var iframeURL = prefs.getString('iframeURL'); var scroll = "no"; var height = 180; var width = 600; if (gadgets.window) { var viewport = gadgets.window.getViewportDimensions(); if (viewport.width) { width = viewport.width; // alert("WV: " + viewport.width); } if (viewport.height) { // height = viewport.height; // alert("VH: " + viewport.height); } } var iframe = document.createElement('iframe'); iframe.setAttribute('width', width + 'px'); iframe.setAttribute('height', height + 'px'); iframe.setAttribute('frameborder','no'); if(scroll){ iframe.setAttribute('scrolling', scroll); } iframe.setAttribute('src', iframeURL); var dest = document.getElementById('dest'); dest.innerHTML = ''; // dispose of the spinner dest.appendChild(iframe); // and insert the iframe } </script><br /> ]]></Content><br /> </Module>

Works perfectly, for now.

You're Holding It Wrong

Remember back in 2010 when there was the big hoopla over the iPhone 4's antenna? And Jobs' infamous quote "Just avoid holding it in that way,"

While it was clearly an issue with the iPhone 4, the phenomenon affected other phones as well.

Recently I was playing with the GPS in my Skyrocket. I noticed that the accuracy varied significantly depending on where I held the phone.

In this screen capture I was holding the phone at the bottom. And, yes, I was on an airplane.

The accuracy is 10 feet. Pretty good at 40,000 ft. and 470 MPH.

Then I moved my hands to cup the phone at the top. Accuracy quickly dropped to several hundred feet.

The number of satellites in use didn't decrease and the signal to noise ratio didn't change dramatically.

I wouldn't jump to the conclusion that this change in hand position affects the cellular signal in the same way. Still it is interesting.

Terms of Service Tracker

I'm not paranoid about Terms of Service but it is interesting to see what changes are happening in that area. I used to subscribe to the RSS feed for TOSBack but it dried up almost 2 years ago. I recently came across Docracy.

Here's an example of the documentation they provide:

Don't You Love AT&T/Comcast/Verizon

One morning recently my wife was complaining (rightly) about technology. She uses a Jensen Docking Speaker System with her iPhone for music in the morning. It would stream an Internet radio station for a few minutes then quit for a few minutes. Of course I "worked" on it but I couldn't make it better so she just turned it off.

When I got to the den and started checking my e-mail and RSS feeds, I noticed that the Internet would run for a few minutes then quit for a few minutes. Even DNS lookups would fail. Seemed vaguely familiar.

This persisted throughout the day. The utility companies are in the process of relocating the utility poles on my street so I assumed that AT&T had rerouted my DSL through a congested switch point.

I prided myself in being unusually tolerant but my patience ran out mid-afternoon. I called AT&T's DSL Repair Service. Luckily I had their number in my address book since I couldn't look it up online.

The first customer service representative I spoke to was "Derek" in India. I simply hung up on him. When I called back I got Mario in California. I explained what I'd observed and asked him to check for problems in my area.

Yeah, you guessed it. There were no problems noted in my area. So off he went after my equipment. His eventual diagnosis was that my 9 year old Westell DSL modem was defective and he'd be glad to replace it for $90. I declined.

Amazingly the defective modem healed itself overnight and now my Internet access is fine.

But the point here is how much is such poor operational information costing the carriers in their customer service departments? Wait, though. You and I are paying for the cost of the poor operational information in our ever increasing rates. And since the carriers usually have a government granted monopoly they really don't care.

YouTube’s HTML5 Player

I'd forgotten about YouTube’s HTML5 player until I came across this Lifehacker post. If you're using a "modern" browser this should work fine.

To turn it on, go to http://www.youtube.com/html5 and opt in.

That was easy.

More Jelly Beans

Earlier this year I upgraded my Captivate to Jelly Bean  (4.2.1) using Cyanogen Mod 10.1. As expected with Cyanogen it has been rock solid. I even considered switching back to the Captivate for my every day phone. Lack of LTE and the inferior camera kept me on the Skyrocket.

AT&T finally announced the Skyrocket Jelly Bean upgrade (with Butter) on April 10, 2013. Samsung posted detailed instructions.

Similar to the Skyrocket upgrade from Gingerbread to Ice Cream Sandwich, the Jelly Bean upgrade was only available using Samsung's Kies.

As called for, I upgraded Kies. As I read and re-read the upgrade instructions the Jelly Bean update downloaded on its own. As this was the same laptop I used for Gingerbread to Ice Cream Sandwich all the necessary drivers loaded cleanly.

Unlike the Gingerbread to Ice Cream Sandwich upgrade I didn't remove the SIM card nor the microSD card. The FAQ specifically said that you could leave them in. I had no problems with either. I did not lose my internal SD storage either. I did not do a factory reset before nor after the upgrade although that is usually a good idea.

The upgrade went perfectly and took about 25 minutes. The laptop is an old IBM ThinkPad T43 and I could see the processor busy most of the time. I'd expect it to be quicker on a more powerful PC.

After the upgrade the first boot went through the normal "optimizing" phase and sometimes I'd see an app start slowly the first time. I presume that this is the Just In Time (JIT) compilation happening.

The Jelly Bean for the Skyrocket is 4.1.2 but I haven't noticed any of the differences between this and the Captivate's 4.2.1. As expected all of the Samsung customizations are carried forward, e.g. TouchWiz and the camera. And you lose a Jelly Bean feature here and there like the widgets on the lock screen. Maybe I just haven't figured that out.

You might want to screenshot your home screens before you start as the upgrade resets them. It also forgets ringtones, etc. Most apps kept their settings.

Jelly Bean is so nice. Here's a screen shot of the in call screen. iPhone users, eat your heart out.

And Google Now, just wow!

I had Googled "Happy Daze" on my laptop looking for the hours of a local hamburger joint. Look at what Google Now did with that signal.

Battery life? I don't know. It's so erratic. You can see my day by day usage here.

There's a lot of whining in the Android forums about the carriers not upgrading their older phones. While all of us geeks want the latest bits as soon as they are available, AT&T and Samsung have upgraded both the Captivate and Skyrocket twice in less than 2 years. I really can't complain about that.

2013 Honda i-MID

I knew in-car technology was going to come to this.

FASTOY X came to a sudden end recently in a pile of shattered glass and airbag dust.

Since I didn't have the luxury of picking the timing, my shopping for a replacement was somewhat shortened. Buy as usual I headed to my faithful Honda dealer.

I came home with FASTOY XI, a 2013 Honda Accord EX-L coupe with six-speed manual transmission.

I could write a book about the new FASTOY but for the moment I want to focus on one feature, really on one part of one feature.

Several of the new Hondas have Intelligent Multi Information Display (i-MID).

The i-MID interfaces with many of the Accord's systems and communicates it all on one screen. It displays everything from your current MPG to what's on the radio to incoming text messages.

But this post is all about one other capability of the i-MID. Honda has externalized many of the car's settings to the i-MID so you can configure how things operate that have never before been accessible.

I downloaded the owner's manual and captured the i-MID settings screens. There are 10 of them!


The groups are: System Settings, Vehicle Settings, Audio Settings, Info Settings, Phone Settings, and Camera Settings.

iPad vs. Data Center

Given that I call myself an IT architect, the headline caught my eye.

How the iPad ruined the lives of IT architects

The author describes how consumer technology has affected data center expectations.

In current times however, we’re being asked to regularly provide levels of solution availability that until recently were reserved for the largest of enterprises ...

This comes on continuing escalation of complexity in our solutions. I recall a discussion with the CFO of a Fortune 100 company about her expectations of IT. I related to her the increased complexity of an SAP TCP/IP solution compared to the previous CICS SNA solution. She was understanding of the challenges but that's where we had to go. And not just with the same availability but better.

What has caused this elevation of expectations?

Today ... the consumerisation of high quality IT has happened and is setting the standard for business IT. ... As a result of this turnaround, the role of an IT architect has got even harder, especially in the small- and mid-enterprise sectors where arguably the pace of IT change has never been faster and the lack of IT governance has never been lower.

I think the last point is also key. In my recent experience in medium enterprises (sub $1B) I've found that the lack of governance is a major problem.

Back to technology...

With their iPads always working and Facebook always being online, business users increasingly have the same expectation of the IT systems they use.

One of the business requirements I recently encountered was a CEO who wants to be able to walk into a customer's conference room and project that customer's business real-time. Stop for a minute and think of all the IT capabilities required to do that. Yet Facebook does it all the time.

Helping business users understand, justify, and quantify their requirements is the skill of a good architect, and is a process we can still use to define availability needs even if it’s to show that ultra-high availability needs bring ultra-high costs.

To the aforementioned CEO, it's just the cost of doing business. The challenge for the architect is "selling" that requirement through the organization.

(T)he problem architects now have is the delivery of infrastructures to support these expected levels of 24/7 availability. Quoting 99.5per cent availability SLAs these days suggests to me that we want the business to feel grateful for whenever the solution is available.

The CEO won't "feel grateful for whenever the solution is available."

(T)he answer ... seems to be for everyone but the richest organisations will almost certainly be the cloud. That brings a new and bigger challenge for the IT architect, how do we learn to trust a face-less cloud service provider?

This is why I think of myself a a Chief Worrier.

Windows Phone 8 EOL

Recently Microsoft announced the end-of-life for Windows Phone 8 and established an 18 month life cycle for the platform's operating systems.

Microsoft will make updates available for the Operating System on your phone, including security updates, for a period of 18 months after the lifecycle start date. Distribution of the updates may be controlled by the mobile operator or the phone manufacturer from which you purchased your phone. Update availability will also vary by country, region, and hardware capabilities.

At first blush this is bad.

But it's not. It's great!

Mary Jo Foley's column assesses this. Her position is that what this means is that there is going to be a continuum of Windows Phone operating system versions.

She bases this on the Microsoft Windows Phone team's tweet:

As we’ve said, one benefit of moving to the Windows core is that Windows Phone 8 is upgradeable.

Mary Jo reads this as Microsoft will be providing in place upgrades to the Windows Phone operating system regularly, more frequently than 18 months.

Obviously some equipment may not be capable of newer versions but given that Windows 7 and Windows 8 lowered the minimum requirements even this may not be a problem. We still have to worry about the carriers.

Let's hope Mary Jo is right.

Click to Play

With all the reports of vulnerabilities of various browser plugins, e.g. Java and Flash, my interest was piqued when I read Brian Krebs post on "Click to Play."

To turn it on in Chrome, go to Settings and click on "Show advanced settings..." at the bottom of the page. Scroll down to "Privacy" and click on the "Content settings..." In the pop-up window scroll down to "Plug-ins" and check "Click to play." Don't forget to click the "Done" at the bottom.

Seems like they could have made this easier.

When you browse to a site that has content blocked by "Click to Play," an icon will appear on the far right side of the address bar that allows you to add an exception for the current site.

Yeah, but...

Lots of web sites use Flash where you don't even know it.

Like this one.

Let's just say that's not "spouse friendly." I can put up with that but I don't think I'm going to roll it out to the rest of the house.